News, Industry News

Home / News / What are the misunderstandings of brake pad replacement?

What are the misunderstandings of brake pad replacement?

Cars are widely used in our lives. They are an indispensable travel tool in our lives. Brake pads are very important core components in automobiles. If the brake pads fail, then the car is prone to accidents during driving. , Brake pads need to be replaced when they are used for a certain number of years, and the replacement of brake pads also needs to avoid some misunderstandings. Here is an introduction: What are the misunderstandings of brake pad replacement?

What are the misunderstandings of brake pad replacement?

1. When we change the brake pads, many manufacturers will not pay attention to one detail, that is our fixing screws. At this time, if we install the screws directly, the new brake pads will rub against our fixing screws. , Will cause noise.

At this time, we need to do a simple maintenance for our screws, that is, we can wrap the screws around with our screw caps, and then add a little more of our screw maintenance fluid, our screws are in a relatively smooth condition, and Thanks to the protection of the screw cap, our brake pads will not rub against the screws and make noise.

2. When changing the brake pads, many manufacturers directly support the car with a jack. In fact, this kind of thing is rather sloppy. At this time, we only need to put the tires of the brake pads under the pillars. It can effectively protect our car because the jack was accidentally dropped during work and damaged our car.

3. After we change the brake pads, we must add some lubricating oil to the brake system. This is also to protect our brake system and effectively reduce the abnormal noise and noise of the brake. Everyone must pay attention to the details when replacing the brake pads.

The above is what are the misunderstandings about the replacement of brake pads? Through the above introduction, I believe that everyone has also understood in detail. When you replace the brake pads, in order to make the brake pads run-in more later, these misunderstandings must be avoided. I hope that the above sharing can help you.

https://www.zjbangchi.com/